傅里叶变换红外光谱固体制样技术

通过对溴化钾与纳米固体超强酸样品的比例进行了探讨 ,得出制样时溴化钾与样品比例范围为1∶ 0 .0 0 1— 1∶ 0 .0 2 9,其最佳比例范围为 1∶ 0 .0 0 98— 1∶ 0 .0 1 5 ,并且应用于其他固体样品的测定 ,结果基本一致。同时得出 ,固体样品的最少检测量为 2 .0× 1 0 -5g     

利用低能质子束产生高强度放射性束流

加拿大TRIUMF实验室利用¹¹C成功验证了一种产生高强度(～10⁸ions/s)放射性束流的方法. 该方法不同于普通在线同位素分离方法, 它利用了13MeV的低能强流质子束, 可以产生一系列核天体物理实验感兴趣的高强度放射性束流.     

Study of fiber optic sugar sensor

Over the last two decades, the fiber optic technology has passed through many analytical stages. Some commercially available fiber optic sensors, though in a small way, are being used for automation in mechanical and industrial environments. They are also used for instrumentation and controls. In the present work, an intensity-modulated intrinsic fiber optic sugar sensor is presented. This type of sensor, with slight modification, can be used for on-line determination of the concentration of sugar content in sugarcane juice in sugar industry. In the present set-up, a plastic fiber made of polymethylmethacrylate is used. A portion of the cladding (1 cm, 2 cm, 3 cm) at the mid-point along the length of the fiber is removed. This portion is immersed in sugar solution of known concentration and refractive index. At one end of the fiber an 850 nm source is used and at the other end a power meter is connected. By varying the concentration of sugar solution, the output power is noted. These studies are made due to the change in refractive index of the fluid. The device was found to be very sensitive which is free from EMI and shock hazards, stable and repeatable and they can be remotely interfaced with a computer to give on-line measurements and thus become useful for application in sugar industries.     

Functional Central Limit Theorems for Triangular Arrays of Function-Indexed Processes under Uniformly Integrable Entropy Conditions

Functional central limit theorems for triangular arrays of rowwise independent stochastic processes are established by a method replacing tail probabilities by expectations throughout. The main tool is a maximal inequality based on a preliminary version proved by P. Gaenssler and Th. Schlumprecht. Its essential refinement used here is achieved by an additional inequality due to M. Ledoux and M. Talagrand. The entropy condition emerging in our theorems was introduced by K. S. Alexander, whose functional central limit theorem for so-calledmeasure-like processeswill be also regained. Applications concern, in particular, so-calledrandom measure processeswhich include function-indexed empirical processes and partial-sum processes (with random or fixed locations). In this context, we obtain generalizations of results due to K. S. Alexander, M. A. Arcones, P. Gaenssler, and K. Ziegler. Further examples include nonparametric regression and intensity estimation for spatial Poisson processes.     

算子的拟酉等价性

本文在复的，可析的、无限维Ｈｉｂｅｒｔ空间Ｈ中引进了算子拟酉等价性的概念；获得了几个重要结果。     

Optimal intensity control of a multi-class queue

We study a mixed problem of optimal scheduling and input and output control of a single server queue with multi-classes of customers. The model extends the classical optimal scheduling problem by allowing the general point processes as the arrival and departure processes and the control of the arrival and departure intensities. The objective of our scheduling and control problem is to minimize the expected discounted inventory cost over an infinite horizon, and the problem is formulated as an intensity control. We find the well-knownc is the optimal solution to our problem.Supported in part by NSF under grant ECS-8658157, by ONR under contract N00014-84-K-0465, and by a grant from AT&T Bell Laboratories.The work was done while the author was a postdoctoral fellow in the Division of Applied Sciences, Harvard University, Cambridge, Massachusetts 02138.     

Conformations, Energy and Spectral Characteristics of 2,3-Trimethylene- and 2,3-Pentamethylene-3,4-dihydro-4-quinazolinones

Quantum-chemical calculations and IR spectroscopy were used to study the conformations as well as the energy and spectral characteristics of 2,3-trimethylene- and 2,3-pentamethylene-3,4-dihydro-4-quinazolinones. The shift of -electron density from the heterocyclic system to the carbonyl group and, thus, the proton affinity of the oxygen atom of this group increase with expansion of the bond angle at the nitrogen atom in going from a five-membered to seven-membered ring.     

Summary of ISO/TC 201 standard: XXI. ISO 21270:2004—Surface chemical analysis—X‐ray photoelectron and Auger electron spectrometers—Linearity of intensity scale

This International Standard specifies two methods for determining the maximum count rate for an acceptable limit of divergence from linearity of the intensity scale of Auger and x‐ray photoelectron spectrometers. It also includes methods to correct for intensity non‐linearities so that a higher maximum count rate can be employed for those spectrometers for which the relevant correction equations have been shown to be valid. Copyright © 2004 John Wiley & Sons, Ltd.     

Improved accuracy of quantitative XPS analysis using predetermined spectrometer transmission functions with UNIFIT 2004

The accuracy of quantitative XPS analysis can be improved using predetermined transmission functions. Two different calibration methods are used for estimating the transmission function T(E) of a photoelectron spectrometer, applying a survey spectra approach (SSA) and a quantified peak‐area approach (QPA) to minimize the quantification error. For the SSA method, Au, Ag and Cu spectra measured with the Metrology Spectrometer II have been used. The new QPA method was built up from Au 4f, Au 4d, Au 4p_3/2, Ag 3d, Ag 3p_3/2, Cu 3p, Cu 2p_3/2, Ge 3p and Ge 2p_3/2 standard peak areas, applying adequate ionization cross‐sections and mean free path lengths for different pass energies (10 and 50 eV), lens modes (large area, large area XL, small area 150) and x‐ray sources (Al/Mg Twin and Al Mono). In the energy range 200–1500 eV a transmission function T(E) = a₀ + b₁E (where a₀, b₁ and b₂ are variable parameters) was found to give an appropriate approximation for eight tested spectrometer settings, implementing the largest changes in the case of pass energy variations. Determination and application of the transmission functions were integrated in the XPS analysis software (UNIFIT 2004) and tested by means of an Ni90Cr10 alloy. The results demonstrate the practicability of the SSA and QPA methods, giving decreased errors of <8% in comparison with errors up to 38% obtained using Wagner's sensitivity factors. Copyright © 2005 John Wiley & Sons, Ltd.